ABOUT THIS ITEM:
- 𝐃𝐑𝐘𝐄𝐑 𝐇𝐄𝐀𝐓𝐈𝐍𝐆 𝐀𝐂𝐂𝐄𝐒𝐒𝐎𝐑𝐈𝐄𝐒 𝐈𝐍 𝐎𝐍𝐄 𝐏𝐈𝐄𝐂𝐄— The package includes 1 x 5301EL1001A Dryer Heating Element Assembly. It also includes housing, wiring, heater, 6931EL3001E 2-wire Thermostat and 6931EL3003D Thermal Fuse. The lg dryer heating element 5301el1001a is rated at 5400 Watts 240 Volts and has 2- 5/16″ male terminals. It is fully assembled in a metal housing for easy installation Hi Limit Thermostat & Thermal Fuse is included and assembled on Heater Housing It has a 5″ Round Opening on one side & 5-3/8″ x 3-3/4″ Rectangle Opening on the other
- 𝐍𝐈𝐂𝐊𝐄𝐋-𝐂𝐇𝐑𝐎𝐌𝐈𝐔𝐌 𝐂𝐎𝐍𝐓𝐄𝐍𝐓 𝐈𝐒 𝐔𝐏 𝐓𝐎 𝟖𝟓%— 5301EL1001A Dryer heating element is made of high quality metal, the heating coil contains NICKEL-CHROMIUM content up to 85% heating coil, can generate stable and effective heat continuously in the dryer. lt has a high resistance that prevents itself from breaking and burning out, not easily deformed in high temperature use, effectively prolong the service life. >>>>𝙉𝙊𝙏𝙀 If your dryer has three terminals at the temperature control, the 5301EL1001H or 5301EL1001J may be a better fit for your model
- 𝐒𝐔𝐈𝐓𝐀𝐁𝐋𝐄 𝐅𝐎𝐑 𝐋𝐆/𝐊𝐞𝐧𝐦𝐨𝐫𝐞 𝐃𝐑𝐘𝐄𝐑— /// 5301EL1001A Dryer Heating Element 𝐅𝐈𝐓 𝐋𝐆 𝐌𝐎𝐃𝐄𝐋𝐒: 4980461 AP4438941 DLE5977S DLE5977SM DLE9577SM DLE0332W DLE3733U DLE2532W DLE5932W DLE8377NM DLE5977WM DLE1310W DLE3777E DLE5932S DLE5977BM DLE5977B DLE6942W DLE7177RM DLE8377WM DLE9577WM DLE2101W CDE3379WD CDE3379WN DLE3777W DLE0442G DLE0442W DLE0442W01 DLE2140W DLE2240W DLE2514W DLE2515S DLE2516W DLE3733D DLE3733S DLE3733W DLE7177WM DLEX7177RM DLEX7177WM DLEX8377N DLEX8377NM DLEX8377WM etc. /// 𝐅𝐈𝐓 𝐊𝐞𝐧𝐦𝐨𝐫𝐞 𝐌𝐎𝐃𝐄𝐋𝐒: 79681473210.( Refer to figure 5 for more models)
- 𝐄𝐀𝐒𝐘 𝐓𝐎 𝐈𝐍𝐒𝐓𝐀𝐋𝐋—Before installing the 5301EL1001A Heating Element,ensure that the dryer has been completely disconnected from the electrical outlet to avoid the risk of electric shock.Prepare screwdrivers and pliers.Remove the rear cover first and carefully disconnect the wires from the heating element.Remember or mark the connection position of each wire to ensure that it corresponds correctly when reconnecting new components.Remove old element and install new heating element.Check that the heating element is firmly installed and the wires are connected correctly.Connect the power supply, turn on the dryer for test, and check whether the new heating element works properly





